View Single Post
Old 10-02-2013, 05:39 PM   #17
granco145
Pow Wow Visitor
 
User InfoThanks / Tagging InfoGifts / Achievements / AwardsvBActivity Stats
granco145 is an unknown quantity at this point
Join Date: Sep 2010
Posts: 10
Credits: 0.00
Savings: 0.00
Quote:
Originally Posted by Toolbox View Post
One possibility, as the pdf that Olchemist linked to suggests, is to use one really long length of wire and make a "U" shape and pass it through the holes. If you are using a leather spreader then you can use a glover's needle and sew through the spreader and around the wire and that would bond the wire to the leather - the roach base would cushion your head from the wire.

If you are using a metal spreader then thats a whole different story. The only suggestion I can say for metal is to coat the bottom parts of the wire, being the section that is out of sight and the section that is touching the metal, in lacquer or urethane to prevent possible galvanic corrosion from damaging the metal spreader. If you are looking to attach the wire to the spreader full time you can try to solder it, but that is entirely dependent on the type of metals in use and your knowledge and skill with soldering equipment.
very helpful! Thanks a bunch!
granco145 is offline   Reply With Quote Share with Facebook