Sumo

Collapse

Announcement

Collapse
No announcement yet.

Best Drum Frame

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • kneegrow_native
    replied
    by getting a sheet of bend-able plyboard and 3/4 inch plyboard, and if you already have the tools, you can make two big drum frames for under $100.

    Leave a comment:


  • wolfhawaii
    replied
    Drum Frame?

    Originally posted by SouthernDrumSinger View Post
    Powwow People,

    For those of you who have made powwow drums, what is the best (and most economical and sturdy) way to make the frame?

    Thanks

    SDS
    My second try at answering, first try lost in cyberspace. Are you asking about the frame that holds the drum or the frame of the drum itself?

    Leave a comment:


  • wolfhawaii
    replied
    Drum Frame

    Originally posted by SouthernDrumSinger View Post
    Powwow People,

    For those of you who have made powwow drums, what is the best (and most economical and sturdy) way to make the frame?

    Thanks

    SDS
    Siyo, I made my drum frame from western red cedar 1 x 4s bevelled together and glued, with 2 inner rims of maple plywood supported by 4 posts of doug fir. The rawhide handles suspend the drum from the 4 point holder and go through the internal posts instead of the side of the drum. The rims were 3/4 ply cut 2 inches wide; glue was Hipurformer hot melt glue. Thickness of the WRC was nominal 3/4. The width of the slats and the degree of bevel will vary depending on the circumference of the drum. I made mine 31 1/2 in diameter and 16 1/2 high, with buffalo rawhide heads and lace. Total cost for materials was about $400. Another way might be to buy a manufactured bass drum rim and put rawhide heads on, but i have seen that kind collapse from the rawhide pulling; mine is extremely strong. To hold the drum, I used 2 x 3 fir with uprights mortised in and the center mortised out where the arms cross for a flush fit and easy disassembly. The rawhide handles of the drum are held in cutouts on the top of the uprights made with a hole saw in a drill. I allowed for about 1 1/2 inches of clearance on all sides to allow the drum to move freely in the frame. Sty yu, Steve

    Leave a comment:


  • SouthernDrumSinger
    started a topic Best Drum Frame

    Best Drum Frame

    Powwow People,

    For those of you who have made powwow drums, what is the best (and most economical and sturdy) way to make the frame?

    Thanks

    SDS

Join the online community forum celebrating Native American Culture, Pow Wows, tribes, music, art, and history.

Related Topics

Collapse

  • WhoMe
    Powwow drums
    by WhoMe
    I recently saw an article about a drum making project that changed the lives and attitude of Native youth that were involved.

    I began thinking about the drum and the many changes that have occurred in the evolution of the powwow drum.

    I used to have a drum sculpture made...
    08-27-2009, 05:00 PM
  • WhoMe
    Drums across the World
    by WhoMe
    As Natives, we pay great respect to the drum. In my tribe, I was taught to respect the drum, "take care of it and it will take care of you." Following this advice, the drum has taken me to many different lands in North America and throughout the world.

    While travelling I noticed...
    03-12-2010, 02:34 PM
  • TacO5000
    Drums
    by TacO5000
    What kind of tone of a drum do you like to sing with? what size, and what kind of stands do you perfer? Who makes keen drum? what kind of hides do you like?



    I was gonna make a which good looking singer has the biggest gutt thread but we have too many of them so here one...
    09-24-2005, 08:45 AM
  • Skabewis
    Being a Young Person in Ceremonies
    by Skabewis
    Produced by Arden Williams
    Reserve, Wisconsin (NFIC) 7-08

    Andrea Low of the St.Croix Band of Ojibwe is one of the head Ogichida'kwewag (female leaders) of Big Drum in her area. Big Drum is a social ceremony, and people visit from different reservations.

    Andrea's...
    07-31-2008, 10:32 AM
  • SouthernDrumSinger
    Drum Making
    by SouthernDrumSinger
    If you look at a lot of the southern drums, they have some type of colorful strip around the rim of the drum. Can you tell me what this is and what its purpose is...I would imagine it is to add additional protection to the hide from wear and tear from the drum sticks...but does anybody know what it...
    12-12-2007, 01:13 PM

Trending

Collapse

Sidebar Ad

Collapse
Working...
X