Announcement

Collapse
No announcement yet.

Beading on Velvet

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • subeeds
    replied
    on the hot glue. I'm still trying to get the fused velvet/hot glue mix off the tile!!!LOL! Pinking shears or a serger like SuzzeQ4 said. No hot glue!!~!!!!!

    Leave a comment:


  • billyjoejimbob
    replied
    i posted a photo of my ingenious beading method.

    Leave a comment:


  • billyjoejimbob
    replied
    how bout hot glue?

    Leave a comment:


  • SuzzeQ4
    replied
    Originally posted by subeeds
    on what everybody says. The only thing I didn't see mentioned is that when you cut velvet make sure to use pinking shears. It frays big time and if you use fray chek or something similar, it can make the color bleed.
    Thats what a surger is for. Don't buy a machine without it.
    Suzze

    Leave a comment:


  • subeeds
    replied
    on what everybody says. The only thing I didn't see mentioned is that when you cut velvet make sure to use pinking shears. It frays big time and if you use fray chek or something similar, it can make the color bleed.

    Leave a comment:


  • billyjoejimbob
    replied
    wow, i didnt expect this many answers, thanks.

    it is gonna be a beat set for grass dance. i have always loved floral beadwork in grass dance, like Gabe Desrosiers (first that came to mind of the many others).

    At first I was gonna use cloth as a background since it would take me forever to fully bead it. Than I figured, if im doing floral, go old time with appliqued flowers on velvet.

    So it is gonna have a fancy colorful border with a line of rhinestones, velvet background and appliq flowers with vines and leaves. and on the sidedrops a contemp beaded design to fill in the wide spot.

    The flowers will go around the drops up to the belt and around the belt and back down the other drop.

    I have it all drawn out on canvas right now.

    I was gonna back the velvet with canvas to stiffen it up.

    But now that i think about it I may just apply the velvet background to the canvas, bead the border, overlapping the velvet, than apply the flowers and then fill in the vines.

    My wife doesnt like the idea, thinks a fancy yellow brocade would be better. But I told her to zip it or Im not finishing her stuff! (even thought i like the brocade idea!)

    I try to get a color design to post for all to see.

    Leave a comment:


  • the bee
    replied
    i use alot of upholstery velvet. It has a good hand, you can draw your design on the back, it lasts for ever, you have to back it, also it is reltivealy inexpensive, depending on type it has a ggod pile.

    Leave a comment:


  • Blackbear
    replied
    OH wait.. tips...

    when ironing the velvet, do it from the non pile or backside of the fabric, but put the fabric over a plush towel doubled over, use something like a cotton diaper on the backside or only lightly touch it with the iron with steam at it's lowest steam setting. Otherwise you'll crush acetate or deep pile velvets. Velveteens can take some abuse but will all of them always iron the wrong side of the fabric, not the pile side.

    Leave a comment:


  • Blackbear
    replied
    how long it will last will depend on the velvet and how it is cared for. I like velveteen too but it "sheds" and never gives that nice thick pile that the acetate does. However you can wash it.. but one more thing I hate about velveteen (my first dress, and wedding dress is ivory velveteen) is that it wrinkles horribly and ironing it with beads on it sucks.
    The best I've worked with I bought at walmart and it was a short pile washable velveteen that was mostly polyester. that's my red skirt and leggings that I wear most of the time if I'm dancing.
    The problems with it though.. i
    t's on the thin side so I probably shoulda lined mine... cause when the light goes thorugh it.. you can see my legs outlined just fine. Two , it can wear out kinda quickly. And three.. if you use too hot of an iron or real hot steam.. you can melt it easily.
    The Pluses,
    well duh.. it's washable, two it can drip dry and still feel soft and wrinkles will fall out so you don't really need to use an iron or steam on it unless embossing it. You can't easily crush the pile so you don't get those crushed pile creases from sitting in the skirt. and it's easy to bead and has a nice finish to it. Also it's alot cooler than your heavier, lusher acetate winter velvets or velveteens.

    Leave a comment:


  • Czechy
    replied
    What are you making? We might be able to give more specific suggestions if we knew.

    Beware that some velvets have some stretch to them. Velveteen is made with some cotton woven in and does not stretch. Its what I prefer to bead on. The velvets made with synthetic materials are more slippery and can be a pain. For backing, I draw my beading design onto a light to medium weight fusible stabilizer and then iron that onto the back side of the velvet. The weight of stablilizer will depend on the amount of stiffness desired. You can lift and cut away the excess stabilizer after beading if you don't need the stiffness.

    Can't say I've seen yellow velvet too often. I bet it will stand out nicely.

    Leave a comment:


  • SuzzeQ4
    replied
    I like beading on velvet. I never used penne or crushed. I use a nice heavy velvet or velvetten. I back it with interfaceing & when I'm done I back that with broadcloth. But yes, be careful with it. Yellow sounds beautiful.

    Suzze

    Leave a comment:


  • between2worlds
    replied
    Starting at wise geek (http://www.wisegeek.com/what-is-velvet.htm) you can learn a lot about what velvet is.

    There are many different kinds of velvet - silk, cotton and rayon being popular. There are also variations like crushed and panne velvet. You can find deep pile or lightweight velvets.

    Working with velvet can be tricky because it is easily damaged. Creases and wrinkles are a devil to get out because they are distortions in the pile. Care must be used in even storing velvet as folding the piece may cause creases.

    This winter I'm making a complete velvet set for myself. I'm using a knit velvet (some say that knit velvet is not "true" velvet) and am backing it with a sturdy cotton lining to stabilize the fabric so the weight of the beads doesn't cause it to hang oddly.

    If I was doing something smaller or with less beadwork I'd use a medium heavy pellum as a backing (a light-weight felt-like material - the fabric store ladies will know what you're looking for if you ask them for pellum or "facing" material. It's also the stuff found sandwiched in between the layers of a dress shirt collar).

    Sounds like an interesting project... post a picture when you're done?

    Leave a comment:


  • billyjoejimbob
    started a topic Beading on Velvet

    Beading on Velvet

    any tips for beading on velvet?

    what to back it with?

    I want to use yellow velvet as a background for beadwork becuase i think it will create a different texture to the piece.

    how long does it last?

    are there different types, thick and thin?

    thanks.

Join the online community forum celebrating Native American Culture, Pow Wows, tribes, music, art, and history.

Related Topics

Collapse

  • jen_lee34
    Beaded Hair Barrette
    by jen_lee34
    Hi,
    I am new to PowWows.com. I am an amature beader. I love making earrings. My daughter is a fancy shawl dancer. I have made her earrings. But now I want to make the hair barrette for the back of her head. And would like to know if anyone could tell me how to get started. Do I bead each bead...
    04-12-2006, 05:53 PM
  • littleswan
    Starting a new men's northern set
    by littleswan
    Hello, I am starting a men's northern set and I had a few beadwork questions regarding what to bead on, and the best way to construct certain things where it looks clean, professional, and will last a few years. I am not new to beading, but I only know how to bead on leather and deer sinew, which isn't...
    09-09-2012, 07:38 PM
  • DakotaPikey
    Backing Help :confused_
    by DakotaPikey
    I'm SO new to powwows.com, have torn these threads apart, and am THRILLED that there are so many wonderful teachers in here willing to lend their advice. I'm completely self taught, but have always had a problem: putting backing on ANYTHING after the beadwork's done (sad, no?). Most of the stuff I...
    09-18-2007, 04:13 PM
  • shayshay08
    need help beginner beader
    by shayshay08
    i am making a new fancy shawl outfit and i was wondering what some people use to actually bead on and what they put to hold it all together on the backing?
    06-24-2009, 01:15 AM
  • 5lilndns
    Where to start????
    by 5lilndns
    Wheeww!!! I just finished my first set of beaded hairties. Yeyahhh!!! lol This is also the first time I've used barrettes in the back instead of ties, is this better? I sewed them in instead of just making slits, is this ok? Now onto the yolk. HELP!!!!! I have no idea where to start. Do I bead thru...
    12-31-2006, 11:39 AM

Trending

Collapse

There are no results that meet this criteria.

Sidebar Ad

Collapse
Working...
X