Sumo

Collapse

Announcement

Collapse
No announcement yet.

Fan question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fan question

    Okay, so I located a fan handle, not detacheable but whole, which is still fine :)

    However, I am wondering what do you use to attach the feathers to the fan. Is there a specific name for that material/piece that I can seek out, perhaps at a art store?
    I'd like to attempt threadwork on it eventually or paint it etc..

  • #2
    Originally posted by aNishKwe View Post
    Okay, so I located a fan handle, not detacheable but whole, which is still fine :)

    However, I am wondering what do you use to attach the feathers to the fan. Is there a specific name for that material/piece that I can seek out, perhaps at a art store?
    I'd like to attempt threadwork on it eventually or paint it etc..
    there is some stuff called glue that seems to work well
    "I on the trail of a possible good Indian lady and she is reported to like the old way's and she to believes in big family and being at home with kids all the time"... - MOTOOPI aka WOUNDED BEAR

    Comment


    • #3
      I assume since you are talking about threadworm, you are using extenders with your feathers. So, are you asking about attaching the feathers to the extenders or the extenders to the handle?

      Attaching the feathers to the extenders; There are probably as many ways as there are fan makers. If I am using extenders with threadwork, I carve a small point and sometimes a ledge to match the diameter of the extender to the shaft of the feather. (Not necessary on bamboo skewers.) If the shaft is intact I cut away the tip, so I can access the pith in the feathers. To keep from splitting the shaft, I take a drill bit, slightly smaller than the diameter of extender, and give it a few turns with my fingers to drill a pilot hole. Then I dip the expender in glue -- I use hide glue, other folks use contact cement or E6000 -- and gently push it in. I wrap the joint and lower, bare section of the shaft with glue soaked paper or strong adhesive tape. Then I do my shingling and add any ermine or leather trim.

      Attaching the extenders to the handle: Depending on the desired shape of the final fan and to some degree whether I'm beading the handle before attaching the feathers, I use one of two methods. I either carve a slot in the handle or make a shelf. I fasten the feathers to a sheet of cardboard, held their final positions with removable scotch tape. Then I glue the extender ends into the slot or onto the shelf. I use wood glue, since still wet spills can be cleaned up with water and it gives me time to adjust anything that moves. If I used the shelf, once dry I fill in the gaps between the dowels with wood filler to smooth it out before covering with leather.


      In the thread below, I drew some sketches of the method I use for both of the above. There are some more details, too.

      Making Flat fans
      Last edited by OLChemist; 01-15-2015, 01:39 PM. Reason: Omissions

      Comment

      Join the online community forum celebrating Native American Culture, Pow Wows, tribes, music, art, and history.

      Related Topics

      Collapse

      • Rolling Thunder
        Loose or Drop fan
        by Rolling Thunder
        how do you make a drop fan? what would I need? I have feathers already, leather, beads, thread, etc..
        should I use a dowel/stick for the handle?

        Feather Fans by Nicholas Breeze Wood...
        08-11-2007, 09:03 PM
      • Traditional Rally
        Help With making a fan (contempory style)
        by Traditional Rally
        Hey there all who read. I'm confused on the new fans. with all of the featherwork and the small dowel handle. you see them in the "crafts" pictures section. I am all stoked on making one for myself know how to do the design but what is used to attach the base of the feather inserts into the...
        06-08-2009, 02:03 AM
      • Haliwa-Saponi
        How To Make A Tail Feather Fan
        by Haliwa-Saponi
        Hey You Guys! So I Got My New Eagle Feathers For My Fan And Im Learning How To Make All OF My Regalia On My Own Now . ( Yay Me ) ! So I Was Wondering If I Could Get Some Help With The Size Of The Dowels And Feather Work And How To Secure The Dowels In The Fan Handle .
        12-29-2013, 10:19 PM
      • Beardancer
        Flat Fan help
        by Beardancer
        OK folks, as if I'm not busy enough trying to finish my vest, tighten up a pair of mocs and bead a bulltail for my roach, I've got the itch to try making a few flat fans. Now, the beading doesn't concern me-that's the easy part. What I'm trying to figure out is the handle. Now I've heard of everything...
        01-30-2003, 05:16 PM
      • greyhawks
        Tying Feathers
        by greyhawks
        Looking for info on properly tying feathers.
        Any help is appreciated.
        11-19-2000, 10:49 PM

      Trending

      Collapse

      There are no results that meet this criteria.

      Sidebar Ad

      Collapse
      Working...
      X