beaded baret

[Vicki]

I just bought this very big beaded baret that is mostly white. I was just wondering is someone can tell me how to clean the baret and make it look new cause the beads look dirty. Its not a new baret.

[Suzizila]

You might try washing it with a mild soap, rinsing it well, and letting it air dry. That's what I do when my barrettes get coated with hairspray.

[Vicki]

Since the baret is several years old,will cleaning it make it look new? Sorry if this is a stupid question.

[Suzizila]

It couldn't hurt to try it out. If there is just the usual build up of dust, then you should notice a bit of a difference. Just give it a try & see what happens. I know it works on hairspray.

[Vicki]

Thanks,I'm gonna try it.

[thestogs]

Using mild soap is good advice. Be careful when rubbing the beadwork since you must be careful not to damage any of the threads. Rather than using a small brush which may damage the threads, try using a Q-tip and gently clean the beadwork with the mild soap solution. Rinse well after you have cleaned it -- any soap residue left on the piece will act as a dirt magnet. Then make certain you allow plenty of time to dry the beadwork.Good luck and I hope this helps.